Setting The Vlan Parameters - Panasonic Hybrid IP-PBX Manual

4.2 Programming the IP Proprietary Telephone
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid IP address range: "1.0.0.0" to "255.255.255.254"
*3 Valid IP address range: "0.0.0.0" to "223.255.255.255"
4.2.2

Setting the VLAN Parameters

To establish voice communications between IP-PTs, the primary ports of the IP-PTs and the connected
Hybrid IP-PBX must belong to the same VLAN. Consult your network administrator and obtain the
appropriate VLAN ID.
It is possible to place primary and secondary ports of an IP-PT on different VLANs by assigning separate
VLAN IDs to each port.
Follow the procedure below for all IP-PTs on the network, using appropriate VLAN IDs.
After assigning
the IP addresses
To set the VLAN ID for the primary port
Select "Primary port".
ENTER
To set the VLAN ID for the secondary port
Return to the
VLAN setting screen.
VLAN ID
1–4094
To end programming
Return to the
Menu screen.
* The VLAN priority of the primary port must be set higher than the priority of the secondary port. The
larger the number, the higher the priority.
32 Information about IP Proprietary Telephones
Select "VLAN".
ENTER
Select "VLAN ID".
ENTER
Select "VLAN Priority".
Select
"Secondary port (TO PC)".
ENTER
Select
"VLAN Priority".
STORE
Press "STORE".
ENTER
Select "Enable" for
VLAN setting.
ENTER
VLAN Priority*
0–7
ENTER
Select "VLAN ID".
VLAN Priority*
ENTER
The IP-PT will reboot
and establish connection
to the network.
VLAN ID
1–4094
ENTER
ENTER
ENTER
0–7