Storage Preparation; Cleaning; Engine; Mowerdeck - Honda HRB2153PDA Owner's Manual

Honda rotary mower owner's manual
Table of Contents

Advertisement

STORAGE
STORAGE
PREPARATION
Proper storage preparation
is essential for keeping your lawn mower
troublefree
and looking good. The following steps will help to keep
rust and corrosion from impairing your lawn mower's function and
appearance,
and will make the engine easier to start when you use
the lawn mower again.
Cleaning
1. Wash the lawn mower, including the underside
of the mower deck.
Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner.
1 NOTICE
1
l
Using a garden hose or pressure washing equipment
can force
water into the air cleaner.
Water in the air cleaner will soak the
filters and can enter the carburetor or engine cylinder, causing
damage.
l
Water contacting
a hot engine can cause damage. If the engine
has been running, allow it to cool for at least half an hour before
washing.
Mower Deck
If using a garden hose or pressure washing equipment
to clean the
mower deck, be careful to avoid getting water into controls and
cables, or anywhere
near the engine air cleaner or muffler opening.
Before washing the underside
of the mower deck, be sure the fuel
valve is in the OFF position. Disconnect
the spark plug cap. Rest
the mower on its right side, so the carburetor
side is up. This will
help to prevent fuel leakage and hard starting due to carburetor
flooding. Wear heavy gloves to protect your hands from the
blade(s).
Grass Bag (HRB215)
Remove the bag from the mower, and wash it with a garden hose
or pressure washing equipment.
Allow the bag to dry completely
before storage.
2. After washing the lawn mower, wipe dry all accessible surfaces.
64

Advertisement

Table of Contents
loading

Table of Contents