Fujitsu PRIMERGY TX150 S8 Datasheet page 7

Data Sheet FUJITSU Server PRIMERGY TX150 S8 Mono-Socket Intel® Xeon® processor server
Electrical values
Power supply configuration
Standard power supply output
Hot-plug power supply output
Hot-plug power supply redundancy
Rated voltage range
Rated frequency range
Rated current max.
Rated current in basic configuration
Active power (min. configuration)
Active power (max. configuration)
Active power note
Apparent power (max. configuration)
Heat emission
Leakage Current
Compliance
Global
Germany
Europe
USA/Canada
Japan
Russia
China
Australia/New Zealand
Taiwan
Compliance link
Compliance notes
Page 7 / 10
Base unit specific:
1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy
500 W (90 % efficiency, 80 PLUS gold)
450 W (94 % efficiency, 80 PLUS platinum)
Yes
100 V - 240 V
47 Hz - 63 Hz
2.4
pending
65 W
278 W
To estimate the power consumption of different configurations use the Power Calculator of the System Architect: http://
configurator.ts.fujitsu.com/public/
296 VA
1000.8 kJ/h (948.6 BTU/h)
leakage current
CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
GS
CE Class A *
CSAc/us
ULc/us
FCC Class A
VCCI Class A + JIS 61000-3-2
GOST-R
CCC
C-Tick (AS / NZS CISPR 22 Class A)
BSMI Class A (CNS 13438, CNS 14336)
CNS 13436
http://globalsp.ts.fujitsu.com/sites/certificates
There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Additional compliance with: Kenya:KEBS; Kuwait: KUCAS; Nigeria:SONCap; South Africa:SABS; Belarus: STB; Kazahkstan:
GOST-K; Ukraine: SEMPRO
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
www.fujitsu.com/fts