Major Functions - NORPOLE EWCIM44ST User Manual

Smaller ice setting:
By pressing the "Clean" button, you can decrease the size of the ice cubes. The Ice Making
(Green) LED will flash as you lower the ice size and will blink continuously when the
setting of the smallest ice size has been reached.
Larger ice setting:
By pressing the "Mode" button, you can increase the size of the ice cubes. The Bin Full
(Red) LED will flash as you increase the size and will blink continuously when the setting
of largest ice size has been reached.
After 10 seconds without any operation, the unit will return to the previous mode.
NOTE: During the ice size adjustment, the "BIN FULL", "ICE MAKING" and "ICE
HARVEST" LEDS blinking all at once indicate that the unit is in the default factory
setting of the ice size.
1. The operating procedure is completely automatic.
2. When the ice storage bin is full of ice cubes, the machine stops making ice and proceeds
to the cold preservation stage automatically. It starts making ice again after ice cubes are
removed.
3. The different colors of the LED display indicate various work modes.
4. The fan motor responds to the ambient temperature. If it is cold, the motor will stop
working to keep the cooling system in good working condition.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.
6. A compressor protection system is built in.

MAJOR FUNCTIONS

23