Draining Your Ice Maker; Section 5: Operating Your Ice Maker; Operating Your Ice Maker - NewAir AI-120S Owner's Manual

4.3 Draining Your Ice Maker
1. Empty the water reservoir before cleaning the unit's interior. To do this, first disassemble the water
drip tray and unplug the water drainage cap. The water will flow out from the unit completely.
Disassemble the
water drip tray
2. Change the water in the water reservoir every 24 hours. If the unit will not be in use for an
extended period of time, drain all of the water left in the water reservoir.
SECTION 5: OPERATING YOUR ICE MAKER
5.1 Operating Your Ice Maker
1. Clean the ice maker's interior (water reservoir, ice shaft, etc.) with lukewarm water and a soft cloth.
2. Position your ice maker away from direct sunlight and other heat sources such as stoves, furnaces
and radiators. Place the ice maker on a flat, level surface and make sure there is at least 6 inches of
space in between the back and sides of the ice maker and the wall.
3. Allow the refrigerant inside the ice maker's cooling system to settle for approximately one hour
before plugging your ice maker in for the first time.
4. Make sure the ice maker's plug is fully accessible.
Unplug the drain cap