Download Print this page

Terminating The Programme; Changing The Programme; Intensive Drying; Cleaning And Maintenance - Siemens SN series Operating Instructions Manual

Hide thumbs


Table of Contents

Cleaning and maintenance

T erminating the programme
T e r m i n a t i n g t h e pr o g r a m me
1. Press START button @ for
approx. 3 sec.
The numerical display H
indicates :
2. The programme sequence lasts
approx. 1 min. On the digital
display H is indicated :
3. Switch off ON/OFF switch (.

Changing the programme

When the START button @ has been
pressed, the programme cannot be
The only way a programme can be
changed is by Cancel programme

Intensive drying

The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Press and hold down the START
button @.
4. Rotate programme selector 8
until :
is indicated on the digital
display H.
5. Release button.
The factory-set value :
the digital display H (intensive
drying off).
Change the setting as follows:
1. By rotating the programme selector
8, you can switch intensive drying
or off :
2. Press START button @.
The set value is saved.
is lit on
Cleaning and
e n a n c e
a n d m a i n t
C l e a n i n g
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
Overall condition
of the machine
Check spray arm for grease
and limescale deposits.
If you find such deposits:
Fill detergent dispenser with
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
To ensure that the door seal always
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not
liable for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water
and a little washing up liquid
are adequate. Do not use sponges with
a rough surface or abrasive detergents,
as these could scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths
or wash them out thoroughly several
times before using for the first time.

Hide quick links:


Table of Contents

This manual is also suitable for:

Sx series