Removing The Hp 1U Adjustable Toolless Rails; Removing Ps2 Cables With Cable-Locking Mechanism - HP TFT7600 G2 User Manual

Removing the HP 1U Adjustable Toolless Rails

Locate the spring release.
1.
Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring
2.
release.
Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable
3.
Toolless Rails out toward you and away from the rack (2).
NOTE:
Toolless Rails, a tool might be required to unlock the spring release from the inside of the HP 1U
Adjustable Toolless Rails.
Repeat the previous steps for the other HP 1U Adjustable Toolless Rail.
4.

Removing PS2 cables with cable-locking mechanism

PS2 cables have a locking mechanism to provide a secure cable connection. You must use proper
procedures when disconnecting these cables.
CAUTION:
to your unit.
To properly disconnect a PS2 cable:
Grasp the housing.
1.
If you cannot gain access to the spring release from the outside of the HP 1U Adjustable
Failure to follow proper disconnect procedures could result in damage to the cable or
Installation 13