3.3.1.2
Configuring the Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Network Time Protocol (NTP), daylight saving time, and Telnet. For a description of
these parameters, refer to ''Configuration Parameters Reference'' on page 223.
To configure the Application settings:
1.
Open the 'Application Settings' page (Configuration tab > Network Settings menu >
Application Settings
2.
Configure the parameters as required. For configuring NFS, under the 'NFS Settings'
group, click the NFS Table
description on configuring this page, refer to Configuring the NFS Settings
3.
Click the
4.
To save the changes to flash memory, refer to ''
SIP User's Manual
page item).
Figure 3-36: Application Settings Page
Submit
button to save your changes.
button; the 'NFS Settings' page appears. For a
Saving Configuration''
62
Mediant 2000
on page 63.
on page
173
.
Document #: LTRT-68809