Figure 3-23: Image Download Screen - AudioCodes Mediant 2000 User Manual

Media gateway
Hide thumbs Also See for Mediant 2000:
Table of Contents

Advertisement

SIP User's Manual
3.
On the left pane, click Image Load to Device
displayed, as shown in the figure below:
4.
Click the Browse
located.
5.
Click the
complete, the page is automatically refreshed and the uploaded logo image is
displayed in the Web interface's title bar.
6.
If you want to modify the width of the image, in the 'Logo Width' field, enter the new
width (in pixels) and then click the
7.
To save the image to flash memory, refer to ''
Notes:
To replace the default logo with a different image using the ini
1.
Place your corporate logo image file on the TFTP server in the same folder where the
device's
2.
Configure the following LogoFileName and LogoWidth in
For a description of these ini file parameters, refer to ''
page
237
3.
Load the ini file to the device using BootP/TFTP (i.e., not through the Web interface).
For detailed information on the BootP/TFTP application, refer to the Product Reference
Manual.
Version 5.8

Figure 3-23: Image Download Screen

button, and then navigate to the folder in which the logo image file is
Send File
button; the image file uploads to the device. When loading is
The logo image must be a GIF, PNG, JPG, or JPEG file.
The logo image must have a fixed height of 24 pixels. The width can be
up to 199 pixels; the default being 145 pixels.
The size of the image file can be up to 64 Kbytes.
If you encounter any problem during the loading of the file or you want to
restore the default image, click the Restore Default Images button.
ini
file is located.
.
; the 'Image Download' page is
Set Logo Width
button.
Saving Configuration''
Web and Telnet Parameters''
47
3. Web-Based Management
on page
173
file:
i
file parameters.
October 2009
.
on

Advertisement

Table of Contents
loading

Table of Contents