Figure 9-12: Configuring Accounts For Pbx Registration To Itsps In Account Table; Figure 9-13: Configuring Itsp-To-Trunk Group #1 Routing In Ip To Trunk Group Table; Figure 9-14: Configuring Tel-To-Ip Routing To Itsps In Tel To Ip Routing Table - AudioCodes Mediant 2000 User Manual

SIP User's Manual
6. In the 'Account Table' page (refer to ''Configuring the Account Table''
configure the two Accounts for PBX trunk registration to ITSPs using the same Trunk
Group (i.e., ID #1), but different serving IP Groups #1 and #2. For each account, define
user name, password, and hostname, and ContactUser. The Register messages use
different URI's (Hostname and ContactUser) in the From, To, and Contact headers per
ITSP. Enable registration for both accounts
Figure 9-12: Configuring Accounts for PBX Registration to ITSPs in Account Table Page
7. In the 'IP to Trunk Group Routing' page (refer to ''Configuring the IP to Trunk Group
Routing''
ID #1 (see 1 below) and from the device to the local PSTN (see 2 below)
Figure 9-13: Configuring ITSP-to-Trunk Group #1 Routing in IP to Trunk Group Table Page
8. In the 'Tel to IP Routing' page (refer to ''Configuring the Tel to IP Routing Table''
page 138
local PSTN (see 2 below)
Figure 9-14: Configuring Tel-to-IP Routing to ITSPs in Tel to IP Routing Table Page
Version 5.8
on page 145 ), configure IP-to-Tel routing for calls from ITSPs to Trunk Group
), configure Tel-to-IP routing rules for calls to ITSPs (see 1 below) and to
.
.
445
9. IP Telephony Capabilities
on page
.
October 2009
111 ),
on