AudioCodes Mediant 2000 User Manual page 363

SIP User's Manual
Parameter
Destination IP to Telcom
[NumberMapIP2Tel]
Version 5.8
6. Configuration Parameters Reference
as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =
NumberMapIp2Tel_DestinationPrefix,
NumberMapIp2Tel_SourcePrefix,
NumberMapIp2Tel_SourceAddress,
NumberMapIp2Tel_NumberType,
NumberMapIp2Tel_NumberPlan,
NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight,
NumberMapIp2Tel_Prefix2Add,
NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted
[\NumberMapIp2Tel]
For example:
[NumberMapIp2Tel]
NumberMapIp2Tel 0 =
01,034,10.13.77.8,$$,0,$$,2,$$,667,$$;
NumberMapIp2Tel 1 =
10,10,1.1.1.1,255,255,3,0,5,100,$$,255;
[\NumberMapIp2Tel]
Notes:

This table parameter can include up to 100 indices.

The parameter
NumberMapIp2Tel_IsPresentationRestricted is not
applicable. Set its value to $$.

RemoveFromLeft, RemoveFromRight, Prefix2Add,
Suffix2Add, LeaveFromRight, NumberType, and
NumberPlan are applied if the called and calling
numbers match the DestinationPrefix, SourcePrefix,
and SourceAddress conditions.

The manipulation rules are executed in the following
order: RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and Suffix2Add.

Parameters can be skipped using two dollar signs ('$$').

The Source IP address can include the 'x' wildcard to
represent single digits. For example: 10.8.8.xx
represents all addresses between 10.8.8.10 and
10.8.8.99.

The Source IP address can include the asterisk ('*')
wildcard to represent any number between 0 and 255.
For example, 10.8.8.* represents all the addresses
between 10.8.8.0 and 10.8.8.255.

To configure manipulation of destination numbers for
IP-to-Tel calls using the Web interface, refer to
''Configuring the Number Manipulation Tables''
129 ).

For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters''
363
Description
on page
October 2009
;
on page
199 .