Cas Parameters; Table 6-43: Cas Parameters - AudioCodes Mediant 2000 User Manual

6.11.3 CAS Parameters

The Common Channel Associated (CAS) parameters are described in the table below.
Parameter
Web: CAS Table
EMS: Trunk CAS Table Index
[CASTableIndex_x]
[CASFileName_x]
[CASTablesNum]
Web: Dial Plan
EMS: Dial Plan Name
[CasTrunkDialPlanName_x]
SIP User's Manual

Table 6-43: CAS Parameters

Defines the CAS protocol per trunk (where x denotes the trunk ID)
from a list of CAS protocols defined by the parameter
CASFileName_x.
For example:
CASFileName_0 = 'E_M_WinkTable.dat'
CASFileName_1 = 'E_M_ImmediateTable.dat'
CASTableIndex_0 = 0
CASTableIndex_1 = 0
CASTableIndex_2 = 1
CASTableIndex_3 = 1
Trunks 0 and 1 use the E&M Winkstart CAS protocol, while trunks
2 and 3 use the E&M Immediate Start CAS protocol.
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol, where x denotes the CAS file ID (0-7). It is possible to
define up to eight different CAS files by repeating this parameter.
Each CAS file can be associated with one or more of the device's
trunks, using the parameter CASTableIndex_x.
Note: For this parameter to take effect, a device reset is required.
Indicates how many CAS protocol configurations files are loaded.
The valid range is 1 to 8.
Note: For this parameter to take effect, a device reset is required.
The CAS Dial Plan name that is used on a specific trunk (where
denotes the trunk ID).
The range is up to 11 characters.
318
Description
Document #: LTRT-68809
Mediant 2000
x