Drain Pump - Kenmore 2927000 Service Manual

7) Disassembly of the Back Cover and

Drain Pump

Remove the screws that attach the back cover and
take it off.
Disconnect the leads and the drain hose from the
drain pump.
Remove the pump attachment screws and the lead
connector. Take the pump assembly out of the
washer.
8) Disassembly of Damper Assembly
9) Disassembly of Rotor and Stator
Use a wrench (M24) to remove the nut that
connects the rotor to the shaft.
(The torque should be 200 kgf/cm or 88 foot-
pounds.)
Remove the rotor by pulling it straight off the splined
shaft.
26