Installation; Installation With The Rubber Bush - Pioneer DEH-P5100R Manual

• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• The semiconductor laser will be damaged if it overheats, so don't install the unit anywhere hot — for
instance, near a heater outlet.
• If installation angle exceeds 60° from horizontal, the unit might not give its optimum performance.

Installation with the Rubber Bush

Dashboard
Holder
After inserting the holder into the dashboard, then select the
appropriate tabs according to the thickness of the dashboard
material and bend them. (Install as firmly possible using the
top and bottom tabs. To secure, bend the tabs 90 degrees.)
Rubber bush
Screw