Powering Up The Unit - Barco SDI-DMX Mixer Pro User Manual

Powering Up the Unit

There is no ON/OFF switch on the SDI-DMX Mixer Pro. When connected to
power, the unit starts and initiates the following:
• The Power light comes on and runs a self test sequence.
• The numeric display on the front panel illuminates displaying the current
DMX address.
• The DMX OK LED will light when the unit is receiving external DMX-512
data.
• After 60 seconds, the unit's numeric display dims to conserve power and
the unit will auto lock. To unlock the interface, press both the <+> and
<-> buttons for 3 seconds.
SDI-DMX Mixer Pro User Manual
5