4. INSTALLATION & TEST
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
The appliance should be installed as follows:
REMOVE THE SHIPPING
Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove easily.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
Turn the leveling feet to adjust
Turn clockwise to raise;
counterclockwise to lower.