9. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet.
Unscrew the screws on the top plate.
The plate assembly(Top) is pulled back and
then upward to arrow direction.
The cover(Inner) is disassembled.
The PWB assembly(Display) connectors are
Pull out drawer, three screws are unscrewed.
Push two upper hooks and pull the control
The PWB assembly(Display) is disconnected.
When 6 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.