Installation; Getting Started; Remove Existing Installations - D-Link DWA-140 User Manual

Wireless n usb mini adapter
Hide thumbs Also See for DWA-140:
Table of Contents

Advertisement

Section 2 - Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing
your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless and Ethernet adapters.
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to.
If you've installed a different manufacture's adapter or a different model D-Link adapter, make sure the software is uninstalled before installing
the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different times, make sure the
utilities are not set to load when your computer boots up. Windows® users may use the built-in wireless utility for all adapters.
To remove any old software:
Windows® 8 users: Press Windows Key + Q > Control Panel > Uninstall Programs.
Windows® 7 users: Click Start > Control Panel > Uninstall Programs.
Windows Vista® users: Click Start > Control Panel > Add or Remove Programs.
Windows® XP users: Click Start > Control Panel > Add or Remove Programs.
D-Link DWA-140 User Manual

Installation

Getting Started

Remove Existing Installations

7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents