Secure Digital Media; Inserting Sd Cards; Removing An Sd Card - Fujitsu LifeBook P Series Manual

Secure Digital Media

Your LifeBook notebook supports Secure Digital (SD)
cards, on which you can store and transfer data to and
from a variety of digital devices. These cards use flash
memory architecture, which means they don't need a
power source to retain data.
Secure Digital (SD) Cards allow portable storage among
a variety of devices, such as cell phones, GPS systems,
digital cameras, and PDAs. SD Cards transfer data
quickly, with low battery consumption. It uses flash
memory architecture.

INSERTING SD CARDS

SD Cards are inserted in the SD Card slot (Figure 4-9).
To insert an SD Card, follow these steps
■ inserting or removing an SD Card during
your LifeBook notebook's shutdown or
bootup process may damage the card
and/or your LifeBook notebook.
■ Do not insert a card into a slot if there is
water or any other substance on the
card as you may permanently damage
the card, your LifeBook notebook, or
both.
1. See your SD Card manual for instructions on the
insertion of your card. Some cards may require that
your notebook is off while inserting them.
2. Make sure there is no card currently in the slot. If
there is, see Removing an SD Card.
3. Insert your card into the slot with the product label
facing up.
4. Push the card firmly into the slot until it is seated in
the connector.
Figure 4-5. Inserting an SD Card

REMOVING AN SD CARD

To remove an SD Card, first see your SD Card manual
for instructions. Some cards may require your LifeBook
notebook to be in Suspend Mode or Off while removing
them. To remove the card from the slot, simply pull it
out.
:
U s e r - I n s t a l l a b l e F e a t u r e s
SD Card Slot
SD Card
41