Before servicing ask troubles of customers
Check the adjustment(power supply is 220-240V ac 50Hz, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O K or NOT.
The appliance should be installed as follows.
REMOVE THE TRANSIT
Remove the transit bolts
(4EA: )with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
INSTALL THE APPLIANCE
ON FLAT AND FIRM SURFACE
Turn the leveling feet to adjust the
Turn clockwise to raise;
counterclockwise to lower.