Power Connector
Removing the Power Connector
1.
Follow the procedures in
2.
Remove the battery.
3.
Remove the
subscriber identity module (SIM)
4.
Remove the
secure digital (SD)
5.
Remove the
back
panel.
6.
Remove the memory.
7.
Remove the
keyboard
8.
Remove the keyboard.
9.
Remove the
optical drive.
10. Remove the
hard
drive.
11. Remove the
wireless local area network
12. Remove the
wireless wide area network
13. Remove the
CPU
door.
14. Remove the
heat sink.
15. Remove the
processor.
16. Remove the
palm rest.
17. Remove the
ExpressCard/Smart Card/PCMCIA module
18. Remove the
display assembly
19. Remove the
LED board.
20. Remove the
support
brackets.
21. Remove the
system board.
22. Remove the power connector from the routing channel.
Before Working On Your
card.
card.
trim.
(WLAN).
(WWAN).
Computer.
29
115