Setting The Minute Minder - Belling Richmond Users Manual & Installation Handbook

Using The Programmer/Clock

Setting the minute minder

G
To set the Minute Minder, press the Function button
once. The bell symbol will appear and start flashing.
The flashing only lasts for 5 seconds so the time must be
set within this time frame.
G
Use the Plus and Minus button to set the length of time
required. Once this has been done, the Minute Minder
is set.
G
When the desired length of time has counted down the
alarm will sound. To cancel the tone, press any of the
buttons.
G
To cancel the Minute Minder at any time, press the Plus
and Minus buttons together.
Semi - Automatic Cooking
The Duration method
Switch off after a set time period
G
Press the Function button twice, which will skip past the
Minute Minder.
G
The display will flash the word 'dur', and the 'A' will flash
on the left hand side of the display.
G
Use the Plus and Minus buttons to set the length of time
you want to cook for. This must be done within 5
seconds or the time of day will show again.
G
Once this is done the oven will automatically switch off
once the time has elapsed, and the alarm will sound. To
switch off the alarm, press any button.
G
To view any remaining time press the function button
twice.
The End Time method
Switch off at a set end time
G
Press the Function button three times, which will skip
past the Minute Minder and the Duration programmer.
G
The display will flash the word 'End' and the 'A' will flash
on the left hand side of the display.
G
Use the Plus and Minus buttons to select the time the
oven is required to turn off.
G
Once this is done the oven will turn itself off at the time
you have selected. To switch off the alarm, press any
button.