Changing Factory Default Settings - Miele H6160B Operating And Installation Instructions

Changing factory default
settings
Settings can only be changed when
the oven is switched on and the
rotary selector is at ß.
Your appliance is supplied with a
number of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status.
^ Touch
.
^ If necessary use the rotary selector to
move the triangle V until it appears
under .
P
V
^ Touch the OK sensor.
P i will appear:
P
^ If you wish to change another setting,
use the rotary selector to select the
appropriate number.
^ Touch the OK sensor.
The setting is selected and the current
status appears, e.g. S 0.
To alter the status:
^ Use the rotary selector to select the
status you want.
^ Touch the OK sensor.
The selected status is saved and the
setting appears again.
If you wish to alter more settings,
proceed as described previously.
Touch
change another.
^ Press
any more settings.
The settings remain in the memory
even after a power cut.
i
s
to skip one setting and
if you do not want to change
Settings
0
39