Replacing the seal retainer
If there is oil or water coming out of the leakage hole the seal
retainer must be replaced.
1 Loosen the two screws for the water module.
2 Use two ﬂathead screwdrivers to carefully prize open the
3 Carefully push in the new seal retainer and screw the
water module back on.
1 Check that nuts and screws are tight.
2 Check that the power switch unit works smoothly.
3 Clean the outside of the machine.
4 Check and clean the cooling air openings.
5 Check that the cord and extension cord are intact and in
Important All types of repairs may only be carried out by
authorised repairmen. This is so that the operators are not
exposed to great risks.