Chevrolet 2012 Full-Size Truck User Manual page 73

Using Voice Recognition
1. Press and hold the SRCE
steering wheel control button for
approximately four seconds. The
audio system mutes, and a beep
is heard. A voice prompt stating,
Please start speaking after the
beep might be heard.
If there is no beep, make sure
that the voice volume setting is
not turned down. See
Navigation Settings under
for more information.
While voice recognition is active,
the system displays a symbol.
2. Clearly speak one of the
commands listed later in this
section.
Canceling Voice Recognition
1. Press and release the
steering wheel control button to
cancel a command, or if the
system response does not
match the verbal command.
2. The system replies, Voice
recognition canceled.
Pressing any other radio or
steering wheel control, other
than the volume knob or the
volume steering wheel control
button cancels the session.
3. Press and hold the SRCE
steering wheel control button to
restart the voice recognition
session.
Helpful Hints for Speaking
Commands
When a multiple command is
available, choose the command
that best works for you.
Words that are in brackets are
optional. For example, the
command Radio [band] FM,
saying Radio FM or Radio
Band FM are both valid
/
commands.
Infotainment System
Words that are separated by a
( / ) mean there is a choice of
using a word on either side of
the slash. For example, the
command (CD/DVD/Disc) [help],
you can say CD [help] or DVD
[help] or Disc [help].
When the system recognizes the
command the system will either
perform the function or ask to
confirm the choice by clearly
saying yes or no.
When the system does not
recognize the command, the
system issues an error message
such as pardon or command
not recognized . The system
could also say, voice
recognition canceled.
If experiencing difficulty with the
system recognizing a command,
confirm that the command is
correct. Try saying the command
clearly or wait for a brief moment
after the beep.
73