Chevrolet 2012 Full-Size Truck User Manual page 38

38 Infotainment System
Power for auxiliary devices is not
supplied by the infotainment system.
To use the auxiliary inputs of the
RSE system:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Power on both the auxiliary
device and the RSE video
screen.
Changing the Source on the Video
Display Screens
The image from the auxiliary device
can be switched between the video
display screens.
To change the display:
1. Press the AUX button on the
remote control to change the
source of both video screens
from the DVD player to the
auxiliary device.
2. Press the AUX button a second
time to change the first row
video screen source to the DVD
player and the second row video
screen to the auxiliary device.
3. Press the AUX button a third
time to change the first row
video screen source to the
auxiliary device and the second
row video screen to the DVD
player.
4. Press the AUX button a fourth
time to change the source of
both video screens to the DVD
player.
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can be
changed from the setup menu using
the remote control. To change a
setting:
1. Press .
2. Use , , , and
select the settings.
3. Press again to exit the
setup menu.
Audio Output
Audio from the DVD player or
auxiliary inputs can be heard
through the following:
Wireless Headphones
Vehicle Speakers
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See Headphones earlier
in this section for more information.
The front seat passengers are able
to listen to playback from the A/V
jacks through the vehicle speakers
by selecting Rear A/V as the source
on the radio.
Video Screens
The video screens are located in the
to
center roof of the first and second
rows of the vehicle.
Avoid directly touching
the video screen, as damage may
occur. See Cleaning the Video
Screens later in this section for
more information.