Advertisement
QuickSpecs
Technical specifications (EM870AA)
Mechanical
Additional components
Color
Notes:
Supported weight
capacity
© 2009-2014 Hewlett-Packard Development Company, L.P. HP shall not be liable for technical or editorial errors or omissions
contained herein. The information is provided as is without warranty of any kind and is subject to change without notice. The
warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein
should be construed as constituting an additional warranty. All performance specifications are provided by the component
manufacturer. Performance specifications represent component manufacturer averages and actual performance may vary.
Dimensions (H x W x D)
Weight
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP thin client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
2mm and 7mm spacers
2 mm spacer accommodates:
Advantage: LA2006x, LA2206x, LA2206xc, LA2306x
Specialty: L2311c
7 mm spacer accommodates:
ZR2240W, ZR2440W, Z24i
Black
1.
No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
2.
The Quick Release device is not to be used between a monitor screen and its stand unless provided
that way from the factory.
3.
Under no circumstances is the Quick Release device intended to be used in an orientation where the
Release/Lock lever is oriented downward.
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon
the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the
combined weight of the monitor and a second device such as an HP thin client product cannot exceed 24
pounds. Because mounting surfaces vary widely and the final mounting method and configuration may
vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that
you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your
mounting solution is properly installed to support applied loads.
DA - 12397 North America — Version 37 — April 1, 2014
Packaged:
Unpackaged:
Packaged:
Unpackaged:
HP LCD Monitor Quick Release
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
1.1 lb (0.49 kg)
0.82 lb (0.37 kg)
Page 4
Advertisement
