• 110° x 85° High Frequency Horn Coating the woofer cone in polypropylene and terminating its circumference in JBL’s WeatherEdge a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance.
Page 4
For outdoor applications, be sure to use a mounting support system which has sufficient wind load strength in accordance with local building codes and regulations. JBL Professional is not responsible for damages resulting from the negligent installation Fig. 4 of any bracket or speaker.
(+) from your power amplifier to the positive input on the the speaker loads (watts) under 80% of the power amp Control 25AV-LS and the negative lead (-) from your power rating. (e.g. A 100 watt amplifier channel will then drive 10 speaker set to 7.5 watts each, i.e.
(on-wall or in-wall). For use with non-DC supervised systems. • General Purpose Use Listed UL-1480, Category UEAY • Control 25AV-LS is suitable for use outdoors in wet locations • Control 25AV-LS is suitable for use indoors in damp locations •...
MAINTENANCE No maintenance is required when assembled in accordance with the instructions and wiring guidelines described in this manual. The cabinet on the Control 25AV-LS is designed to be weather resistant but it is NOT WEATHERPROOF. JBL Professional Control 25AV-LS...
IEC standard, full bandwidth pink noise with 6 dB crest factor for 100 Hours. Half-space (on wall) averaged 100 Hz to 10 kHz. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy. 8500 Balboa Boulevard...