Get Started; Install Battery; Connect Power; Set Clock - Philips AJ4000B User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Install battery

Caution
•
Risk of explosion! Keep the battery away from heat,
sunshine or fire. Never discard battery in fire.
•
The battery contains chemical substances, so it should
be disposed of properly.
Insert one 9V 6F22 battery (not supplied) with
correct polarity (+/-) as illustrated.
Note
•
The battery can only back up clock and alarm settings.

Connect power

Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
6 EN
Note
•
The type plate is located at the bottom of the clock
radio.

Set clock

1
Switch the slider to SET TIME .
» The hour and minute digits blink.
2
Press HR and MIN to adjust time.
3
Switch the slider to CLOCK to confirm
the setting.
1
SET TIME
3 3
MIN
MIN
2
HR
4
CLOCK