Sony TRINITRON KV-20FS120 Service Manual page 90

TV, VCR, and Cable Box
2
Cable Box
1
From cable
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack
on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
If you will be controlling all channel selection through your cable box, you should consider using the
Channel Fix feature by setting your TV to channel 3 or 4 (see page 22).
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by
connecting Audio/Video cables (not supplied) from Audio and Video OUT on your VCR
to Audio/Video IN on your TV.
For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable.
S-VIDEO does not provide sound; the audio cables must still be connected.
S-VIDEO is only for KV-24FS120 model.
You can use the
3
VCR
Optional connection
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
9