Hide thumbs Also See for EF2800i:
Table of Contents

Advertisement

6. Drain the fuel remaining in the carburetor into an
1 Drain screw
7. Tighten the drain screw.
1
7VU-004
8. Turn the engine switch to "OFF".
9. Turn the fuel cock lever to "OFF".
10. Tighten further if any screws, bolts and nuts are
11. Store the generator in a dry, well-ventilated place,
AE00621

ENGINE

Perform the following steps to protect the cylinder, pis-
ton ring, etc. from corrosion.
1. Remove the spark plug, pour about one table-
2. Pull the recoil starter until you feel compression.
3. Clean exterior of the generator and apply a rust
4. Store the generator in a dry, well-ventilated place,
5. The generator must remain in a vertical position
712-010
approved container by loosening the drain screw
on the carburetor float chamber.
loose.
with the cover placed over it.
spoon of SAE 10W-30 or 20W-40 motor oil into
the spark plug hole and reinstall the spark plug
only. Recoil start the engine by turning over sever-
al times (with ignition off) to coat the cylinder walls
with oil.
Then stop pulling. (This prevents the cylinder and
valves from rusting).
inhibitor.
with the cover placed over it.
when stored, carried or operated.
– 35 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents