Advertisement
EPG (Electronic Program Guide)
•
Brightness: Adjust the brightness of picture.
•
Contrast: Adjust the contrast of color.
Press EPG button on the remote control, the electronic program guide
•
Color: Adjust the richness of color.
will appear in the center of screen. The electronic program guide gives
•
Tint: Adjust the balance between red and green level (only
the TV program playing project. You can use left/right arrows to switch
available in NTSC signal).
•
Sharpness: Adjust the sharpness level of picture.
pages.
Screen Size
D50 - 1
Page 1/2
KOCE-HD
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Cinema, Zoom, and Normal.) Please choose the ratio that applies
Smart Travels - Pacific Rim with Rudy Maxa
23 : 00 - 23 : 30
to your video signal format best.
Stockholm & Sweden is a natural-born beauty, winning us over with
Color Temperature
luxuriant landscapes and sleek Scandinavian style. We cruise through
Stockholm's sun-dappled archipelago, visit a designer hotel and sip cocktails
in the trendy Ice Bar (a lounge...
This option allows you to select one of three automatic color
adjustments: Cool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Advanced Picture Settings
OSD Menu Operations
•
Dynamic Contrast: Set dynamic contrast Off/low/Medium/High.
•
Film Mode: Set film mode on/off.
Adjust the OSD Screen
•
Noise Reduction: Set noise reduction as Off/low/Medium/High.
•
MPEG Noise Reduction: Set MPEG noise reduction as Off/low/
Mediumor High.
The OSD (On Screen Display) menu enables you to approach to the TV
Note: Noise reduction helps to reduce the picture "static" or
functions.
any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions.
To use OSD menu system, press MENU button on remote control,
The MPEG Noise Reduction specifically works on video signal
then use left/right arrow to highlight an option from PICTURE, SOUND,
with MPEG coding.
CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER/down
button.
Sound Menu
Press the up and down arrow to move to a different option within each
menu. If necessary, press ENTER or right arrow to display the choices
of the option you've highlighted. If available, use the text at the bottom
The Sound Menu lets you adjust audio output. To access the Sound
of each screen for help. To return to the previous menu, press the
Menu, press MENU on the remote, and then select SOUND from the
MENU button.
Main Menu. Press ENTER/down button to proceed to SOUND menu.
To exit the OSD menu:
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
•
Press the EXIT button. The menu will clear from the screen.
•
Press the MENU button repeatedly until the menus disappear.
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
Picture Menu
The Picture Menu contains menus and controls to configure the way
the picture appears. The Picture Menu options apply to the video for
the main TV and VIDEO INPUT selections. All picture options can be
applied to each input.
Use up/down to choose the function you need, press ENTER or right
Press MENU on the remote. Select Picture from the Main menu. Press
arrow to adjust or enter a sub-menu. Thesub-menu image and
the ENTER/down button to proceed to PICTURE menu.
explanation are shown below.
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
Sound Settings
•
Sound Mode: Choose the preset sound mode of your TV:
Standard, Soft, User, Dynamic. Only in User mode you can
Picture Settings
adjust Bass, Treble, Balance.
Screen Size
Wide
•
Bass: Adjust the bass component of TV sound.
Color Temperature
Warm
•
Treble: Adjust the treble component of TV sound.
Advanced Picture Settings
•
Balance: Adjust the balance between the left and right channel.
Surround Mode
Creates a 3D sound surround from standard stereo material, with
deep and rich enhancement.
Auto Volume
Set auto volume control on/off.
Use up/down to choose the function you need, press ENTER or right
Analog Sound
arrow to adjust or enter a sub-menu. The sub-menu image and
Select analog TV audio sound type: Stereo, Mono or SAP (only
explanation are shown below.
available in TV mode).
If available, use the text at the bottom of each screen for help.
Digital Sound
Picture Settings
Select digital TV audio language type: English, French or Spanish
Picture Mode: Choose the preset visual mode of your TV:
(only available for DTV channel).
Standard, Movie, User, Dynamic, Power Saving. (Only in User
Digital Audio Output
mode you can adjust Brightness, Contrast, Color, Tint and
Sharpness. Changes to Power Saving mode can decrease the
Set the audio output type as Off, PCM or Raw. Please set this
power consumption.
option according to your power amplifier.
8
Equalizer Settings
Lock Parental Control
The seven-band graphic equalizer allows you to adjust the audio
• When the Parental Control Menu is accessed from the Main
frequency settings. You can select one of the equalizer presets
Menu, you need to enter password to unlock the menu function.
Please enter your four-digit password with numeric keys 0~9.
(Off, Pop, Rock, Jazz) or create your own personal preset (User).
Note: The original password is "0000".
Press the left or right arrow to select the frequency (100Hz, 250Hz,
• After unlocking, the items in parental control menu can be used.
500Hz, 1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use the
Use arrow up/down to highlight the function you need and press
up or down arrow to adjust.
ENTER or right arrow to use V-chip, Change Password, Keypad
Lock and Source Lock, Clear Channel List sub-menu.
Channel Menu
V-Chip
The Channel Menu enables you to search, view and edit channels. It is
Press ENTER or right arrow to enter V-chip sub-menu, the detail as
available in TV mode only. Press MENU and choose CHANNEL from
follow:
the Main menu. Press the ENTER/down button to proceed to
PICTURE
CHANNEL menu.
PICTURE
SOUND
CHANNEL
PARENTAL
SETUP
OTHERS
Channel List
Favorite List
Channel Settings
Signal Type
Air
Auto Channel Search
US V-Chip
Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus: Movie Rating and TV rating. See
Use up/down to choose the function you need, press ENTER or right
next page for more details.
arrow to adjust or enter a sub-menu. Thesub-menu image and
explanation are shown below.
Movie Rating
Channel List
Use arrow keys to select the rating level you want to block, press
ENTER to lock/unlock the rating level. If you have blocked a lower
Displays a channel list. It shows the current channels.
level rating, the higher ratings will be blocked too.
Favorite List
For example, when PG-13 is blocked, R, NC-17 and X will be
Sound Settings
blocked at the same time.
Displays a favorite channel list. It shows the current
Surround Mode
Auto Volume
TV Rating
favorite channels.
Analog Sound
Stereo
Similar with Movie Rating. After adjusting, press MENU to return or
Digital Sound
English
Channel Settings
press EXIT to exit the menu.
Digital Audio Output
PCM
Go to channel setting sub-menu.
Equalizer Settings
TV Rating Overview
Channel: Press up/down arrow to switch the channel you want to
edit.
Skip: Set if the current channel is skipped.
TV-MA Mature Audience Only
Favorite: Set if the current channel is the favorite channel.
Label: Enter a channel label to rename the current channel.
TV-14 Parents Strongly Cautioned
Signal Type
TV-PG
Select your TV signal type: Air or Cable.
TV-G
Auto Channel Search
TV-Y7
Execute an auto channel search (see page 7).
Parental Menu
TV-Y
For more rating explanation, see page 12.
The Setup Menu enables you to lock program with special content,
Canada V-Chip
panel key board and input source. Press MENU and choose
PARENTAL from the Main menu. Press the ENTER/down button to
Press ENTER or right arrow to enter US V-Chip ratings menu,
proceed to PARENTAL menu.
which contains two sub-menus: English Rating and French Rating.
English Rating
PICTURE
SOUND
CHANNEL
PARENTAL
SETUP
OTHERS
Press ENTER or right arrow to enter English rating menu.
Use arrow keys to select the rating level you want to block, press
Lock Parental Control
ENTER to lock/unlock the rating level. If you have blocked a lower
V-Chip
level rating, the higher ratings will be blocked too.
Change Password
For example, when PG is blocked, 14+ and 18+ will be blocked at
Remote
the same time.
Keypad Lock
Source Lock
French Rating
Clear Channel List
Press ENTER or right arrow to enter French rating menu.
Similar with English Rating.
Note:
rating information.
9
Block Unrated Show
Block all the unrated program.
Downloadable Rating, Clear Downloadable Data
Activate or downloadable rating data. if available.
Change Password
Change the password of parental menu.
Old PIN: Input the old password.
New PIN: Input the new password.
Confirm: Input the new password again to confirm.
Remote
SOUND
CHANNEL
PARENTAL
SETUP
OTHERS
Select your Remote: Off, Remote1 or Remote2. This is for special
purpose.
Keypad Lock
US V-Chip
Canada V-Chip
Select this option to block or unblock the TV's side panel buttons
Block Unrated Show
so that they can't be used.
Downloadable Rating
Clear Downloadable Data
Source Lock
This option allows you to lock or unlock the input source. The
source blocked can not be chosen from input list unless you input
the correct parental password.
Use up/down arrow to select the source, press ENTER to lock or
unlock it.
Clear Channel List
This option allows you to execute Clear Channel List function. This
function will reset the whole TV system to factory default (not only
reset OSD menu).
Setup Menu
The Setup Menu lets you config the TV with your preferences. Select
SETUP from the Main Menu. Press ENTER/down button to proceed to
SETUP menu.
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
Closed Caption
Menu Language
Menu Transparency
Clock
Age-Based Ratings
Content Themes
Initial Setup Wizard
D
Sexually Explicit Dialogue
L
Adult Language
Parents Guidance Suggested
S Sexual Situations
Use up/down to choose the function you need, press ENTER or
General Audience
V
Violence
right arrow to adjust or enter a sub-menu. The sub-menu image
Directed to Children 7
and explanation are shown below.
FV Fantasy Violence
Years and Older
Closed Caption
All Children
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
Caption Display
Press left/right arrow to select caption display on or off.
Analog Caption Type
These ratings are available only if the broadcaster is sending
Press left/right arrow to select analog closed caption type: CC1,
CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4.
Digital Caption Type
PICTURE
Press left/right arrow to select digital closed caption type: Service1,
Service2, Service3, Service4, Service5, Service6.
Digital CC Preset
Press left/right arrow to select digital closed caption preset: Default,
Custom. Only in custom mode you can adjust the digital closed
caption style.
Digital CC Style
Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style.
Select the item you want to adjust in Digital CC Style menu with
up/down arrows.
Use up/down to choose the function you need, press ENTER or right
After changing, you can preview the caption style in the bottom.
arrow to adjust or enter a sub-menu. The sub-menu image and
explanation are shown below.
Menu Language
Blue Back
To choose your menu language, press the left/right arrow until the
language you need appears.
Press ENTER button to select Blue Back on or off. If the Blue Back
Available languages: English, French and Spanish.
is turned on, the TV will display a blue background when there is
no signal input.
Menu Transparency
No Signal Power Off
To choose your menu transparency mode, press the left/right
Press ENTER button to select "No Signal Power Off" on or off. If it
arrow until the transparency you need appears: Off, Low, Medium,
is turned on, the TV will shut off after 10-minute no signal time. We
High.
suggest you turn on this function when Blue Back is turned on. It
may hurt the LED LCD panel if blue screen is on for too long.
Video Style
Note: In PC mode, the monitor standby and power off settings
If you connect the HDMI/DVI port of PC to HDMI jack of the TV
depend on the No Signal Off time.
and the video signal is 1080p, please choose the compatible video
No Operation Power Off
style: Video, Graphic.
Press ENTER button to select "No Operation Power Off" on or off.
Clock
If it is turned on, the TV will shut off after a 3-hour no operation
time.
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
All Reset
Press ENTER button to execute reset to TV system. All the settings
Time Zone
Eastern
will be reset to factory default.
Auto Clock
Setup Time
1980-01-06 18:49:24
Audio Only
Day of Week
Sun
Daylight Saving Time
Press ENTER button to activate audio only mode. The TV will
English
output only sound and the panel will be turned off. To restore
Off
normal playing, hold POWER button for three seconds.
Video style
Video
Note: The OSD's appearance and color are referred to the actual
appliance.
Frequently Asked Questions (FAQs)
Time Zone
Select your time zone: Eastern, Central, Mountain, Pacific, Alaska,
Hawaii, Samoa, Newfoundland, Atlantic.
What's the most convenient way to view High
Definition (HD) video?
Auto Clock
Select auto clock on/off. Auto clock helps you synchronize your TV
Connect an antenna to the TV Input jack to view free local digital
time to standard time (from DTV signal).
channels. You may need to purchase an antenna. (See page 4 for
more information about antenna setup).
Setup Time
Visit www.antennaweb.org for assistance in deciding what type of
antenna to use to receive the local digital channels available to you.
Set your TV time manually (needs to turn off auto clock).
After entering your location, this mapping program tells you which local
Caption Display
Off
analog and digital stations are available using a certain antenna.
Analog Caption Type
CC1
Day of Week
Digital Caption Type
Service1
Are there other ways to view High Definition
Displays what day it is (can't be adjusted, displays only).
Digital CC Preset
Default
(HD) video?
Digital CC Style
Daylight Saving Time
Besides using an antenna as mentioned above, you can also use a
Set your daylight saving time on or off (needs to turn on auto clock).
set-top box to receive digital video. Contact your cable service provider
or satellite provider to purchase digital programming and have them
connect the box to ensure you are viewing channels in the best way.
Initial Setup Wizard
To set the initial settings. (see page 7)
How do I tell an analog channel from a digital
channel?
Others Menu
Press the DISPLAY button to display the Channel Bar. Look at the top
right corner of the screen. An "A" is displayed for an analog channel.
The Others Menu lets you config the TV with your preferences in other
A "D" is displayed for a digital channel.
features. Choose OTHERS from the Main Menu. Press ENTER/down
Note: Since the analog TV in America has been cut off, we reserve
button to proceed to SETUP menu.
analog TV function only for some unexpected use.
10
Why are there bars on my screen, and can I get
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but is
Blue Back
sometimes sent in 4/3 which does not fill your screen. It depends on
No Signal Power Off
how the station or device connected to your TV is formatting the video.
No Operation Power Off
If there are bars on the screen,
All Reset
Execute
press the ASPECT button to try a different format that may eliminate
Execute
Audio Only
the bars. Some bars can't be removed because of the way the format
is sent by the broadcaster. The format changes as you press the
ASPECT button and the format type is displayed at the bottom of the
screen. For more information on screen size, go to page 8.
Why does channel search find a lot of channels,
but when I try to tune to them, there's nothing
there?
Some channels don't carry programming, such as video On Demand.
When channels are unavailable, your TV screen is blank or appears like
snow. You probably want to remove these channels from your channel
list. Remove these in the Channel List Menu. Go to page 9 for more
information.
Why does it take a long time when I search the
channels at first time?
If you have both analog and digital channels, the TV is looking for all
available channels in the channel list. If you do have digital channels,
the TV is also searching for scrambled channels, non-scrambled
channels, and each sub-channel of that digital channel.
Troubleshooting
Identifying Problems
If there are any problems when using the product, please consult the
list below. If the list does not solve the problem, call our Customer
Service Center immediately.
TV Problems
The TV can't be turned on.
• Make sure the AC cord is plugged in.
• Check the wall outlet, make sure the AC output works normally and
stably.
• The side panel may be locked (disabled). Use the remote control to
turn on the TV.
• Select the Keypad Lock function in the PARENTAL Menu and press
ENTER to uncheck the locking status.
There is no picture or sound but the TV is on and there
is a "No Signal" sign on screen.
• Are you trying to use an input source with no device connected to
it? For using other video/audio device, make sure the external
device works normally first, then press INPUT and choose the right
input source.
• The Signal Type option may be set incorrectly. Go to page 9 for
detailed instructions.
• The channel may be blank. Try to search the channel again or
change another channel.
The sound is fine, but the picture is poor.
• If you can only get black and white pictures from external device
that you've connected to your TV, maybe it is due to the video
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness. For
AV input, the yellow video cable connects to the yellow Video In
jack on the side of your TV. For Component input, the three Y, Pb,
Pr video cables (red, blue, and green) should be connect to the
corresponding input jacks on the side of your TV.
• Check the antenna connections. Make sure all of the cables are
firmly connected to the TV jack on side of your TV.
• Try adjusting the color features to improve.
There is no sound, but the picture is fine.
• The sound might be muted. Try pressing the MUTE button to
restore sound.
• For using AV or Component, remember to connect the device's left
11
Hide quick links:
Advertisement
