When You Use A Panasonic Proprietary Telephone - Panasonic KX-TAW848 User Manual

When You Use a Panasonic Proprietary Telephone

If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions" for PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Fixed Buttons
CO :
Used to make or receive an outside
(CO) call. (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the CO line "number" [e.g., 1, 2]
may be shown on some telephones.)
AUTO DIAL/STORE :
Used for System/Personal Speed
Dialing or storing program changes.
REDIAL :
Used to redial the last dialed number.
INTERCOM :
Used to make or receive intercom
calls.
MONITOR :
Used for hands-free dialing. You can
MONITOR MONITOR
monitor the party's voice in hands-free
mode.
TRANSFER :
Used to transfer a call to another party.
FLASH/RECALL :
Used to disconnect the current call and
FLASH/RECALL
make another call without hanging up.
1.1 Before Operating the Telephones
SP-PHONE :
Used for hands-free operation.
SP SP-PHONE
PAUSE :
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
MESSAGE :
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
AUTO ANS (Auto Answer)/MUTE :
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
HOLD :
Used to place a call on hold.
CONF (Conference) :
Used to establish a multiple party
conversation.
Call Forwarding (FWD)/Do Not
Disturb (DND) :
Used to perform Call Forwarding (FWD)
or Do Not Disturb (DND).
User Manual 15