TP-Link TL-WPA4220 Quick Installation Manual

Quick Installation Guide
300Mbps AV500/AV200 WiFi Powerline Extender
TL-WPA4220/TL-WPA2220
MODEL NO.
Unify and Extend Wi-Fi Network via Wi-Fi Clone Button
If you have established a Wi-Fi network with a router supporting WPS, you can unify and extend this current network using the Wi-Fi Clone button. During the Wi-Fi Clone process, the extender will automatically copy the SSID and
wireless password of your router, giving you a seamless roaming wireless networking experience . See the steps below to get started.
1. Plug in the Wi-Fi Powerline Extender near your wireless router.
2. Press the WPS button on the router.
Wireless Router
3. Press the Wi-Fi Clone button on the extender and the Wi-Fi Clone LED will begin blinking slowly. In about
20 seconds, all the LEDs will be solid momentarily and then the Wi-Fi LED will begin blinking quickly,
indicating that the Wi-Fi clone process is complete.
7106504344 REV1.0.1

Package Contents

This Guide, shared by TL-WPA4220 and
TL-WPA2220, uses TL-WPA4220 as an example.
300Mbps AV500/AV200 WiFi Powerline Extender
MODEL NO. TL-WPA4220/TL-WPA2220
Wi-Fi Powerline Extender*
Resource CD Ethernet Cable
* The provided power plug may di er from the
picture due to di erent regional power speci cations.
Warning Before Installation
WPS/
ROUTER WISP
INTERNET RESET
WPS/
INTERNET ROUTER WISP RESET
Wi-Fi Powerline Extender
LED and Button Description
QIG
Buttons
Press the button to start Wi-Fi Clone.
(For details, see Unify and Extend
Wi-Fi/
Wi-Fi Network via Wi-Fi Clone Button.)
Wi-Fi Clone
Press the button for 5 seconds to enable
Button
or disable the wireless function.
Pair button is used to secure a powerline
network. (For details, see Pair Button on
Pair Button
the next page.)
Press the Reset button for more than 5
seconds, the device will restore to its
Reset Button
factory defaults.
4. Connect the Powerline Adapter to the LAN port of the router and plug it into the wall socket.
Wi-Fi Powerline Extender
5. Place the Wi-Fi Powerline Extender in the desired location.
TP-LINK powerline devices are Plug and Play. A powerline network is established between
the powerline adapter and the extender as soon as you plug in the powerline devices.
Power LED
Powerline LED
Ethernet LED
LEDs Status
Wi-Fi/Wi-Fi Clone LED
Wi-Fi/Wi-Fi Clone Button Solid
O
Ethernet Ports
Power
Blinking
Pair Button
Solid
Reset Button
O
Powerline
Description
Blinking
Solid
Ethernet O
O
Blinking
slowly
Wi-Fi/
Blinking
Wi-Fi Clone
quickly
Powerline Adapter
SSID: abc
Password: 123
SSID: abc
Password: 123
Wireless Router Wireless Router Wireless Router Wireless Router Wireless Router Wireless Router
ROUTER WISP
INTERNET
Description
The device is on.
The device is o .
The device is pairing.
The device is connected to a
powerline network, but there is
no data being transferred.
The device isn't connected to
any powerline network.
The device is transferring data.
The Ethernet port is connected.
The Ethernet port isn't
connected.
The wireless function has been
disabled.
The extender is cloning Wi-Fi
settings from another device.
The wireless function has been
enabled.
WPS/
RESET