Sanyo PLV-Z1 Service Manual page 22

■ Adjustment
■ SERVICE MODE ADJUSTMENT MENU
Adjustment Item
Item-no.
42 1. PSIG adjustment
43 1. PSIG adjustment
1 2. Signal center DC adjustment-Red
2 2. Signal center DC adjustment-Green
3 2. Signal center DC adjustment-Blue
7 3. Red contrast adjustment
8 3. Green contrast adjustment
9 3. Blue contrast adjustment
10 4. Red signal amplitude adjustment
11 4. Green signal amplitude adjustment
12 4. Blue signal amplitude adjustment
13 5. Flicker reduction -Red
14 5. Flicker reduction -Green
15 5. Flicker reduction -Blue
16 6. Contrast linearity adjustment
17 7. White balance adjustment-Red
18 7. White balance adjustment-Blue
Caution :
Other adjustment items are not related to service and a maintenance. Don't press the VOLUME (+) and (-) button
at the time of those adjustment items. Otherwise it may cause loss of product safety.
Note :
In case of adjusting without the cabinet top, the setting for Fan Control is needed specially as shown below.
(Refer to "Electrical Adjustment" to enter the service mode and adjust.) After servicing, set to previous data.
Adjustment Item: No. 51
Adjustment Data: "0" (With Cabinet Top) ➞ "1" (Without Cabinet Top)
Adjustment Mode
Not designated
-22-
PC AV Component
●
●
●
●
●
● ●
● ●
● ●
●
●
●
●
●
●
● ●
● ●
● ●
●
●
●
●
●
●