Midland WR-100 Owner's Manual page 7

Silence Alarm Clock - by pressing any button except
WEATHER/SNOOZE."
TURN OFF ALARM CLOCK by pressing "MENU", "UP" arrow,
"SELECT", "UP" arrow, "SELECT", and then press "MENU" repeatedly
to display current time.
7. VOLUME ADJUSTMENT.
A. When the Weather Receiver is turned on, "NOAA" will appear
on the display.
B. Press "WEATHER/SNOOZE" button; "WEATHER" will appear
on the display.
C. Press "UP" (or "DOWN") button to select volume. (Note: 4
volume bars at top right corner of display.
8. PROGRAM THE WEATHER/HAZARD CH. FOR YOUR AREA.
A. Press "MENU"
B. Press "UP" directional arrow until "CHANNEL" is displayed.
D. Press "SELECT".
E. Press up directional arrow until you hear a clear broadcast
signal of your station. Press "SELECT".
F. Press "MENU" to close menu mode. To turn Weather/Hazard
broadcast on again, press "WEATHER/SNOOZE".
Note you will hear only static on the channels not received in your area.
(FYI — channels are listed 1-7 on the left, and corresponding frequency
numbers are displayed on the right side of display.)
AT THIS POINT YOU WILL RECEIVE WEATHER AND
HAZARD ALERTS ISSUED BY THE NWS.
http://www.midlandradio.com
)
6