Download Print this page

Midland WR-100 Owner's Manual: Quick Start Instructions

Noaa all hazard/weather receiver, same digital weather/hazard alert receiver.
Hide thumbs

Advertisement

QUICK START INSTRUCTIONS.

1. SWITCH - Turn the Weather Radio Switch to ON
2. BATTERIES - Install 3 AA Alkaline batteries (not supplied)
3. AC POWER ADAPTER - Plug the AC Adapter into a standard
power outlet. Plug AC Power Adapter into DC jack on back of the
Weather Receiver.
4. ANTENNA - Position telescoping antenna vertical and extend to its
full length above the Weather Receiver.
5. PROGRAM THE CLOCK TIME.
A. Press "MENU" button to open menu options on the LCD
Display. On the display you will see "TIME"
B. Press "SELECT" button (hour option will begin flashing.)
C. Press "UP" arrow until current hour is displayed.
Note: AM /PM (on the right) changes as you scroll through hours.
D. Press "RIGHT" arrow to save current hour and advance to
minute settings. Program minutes the same way.
E. Press "SELECT" to store the current time.
F. Press "MENU" until menu is closed and current time is
displayed.
6. PROGRAM ALARM CLOCK.
A. Press "MENU" button to open programming menu options.
B.
Press "UP" arrow to scroll through menu, until "ALARM" is
displayed, then press "SELECT" button. Press "UP" arrow to
display "ON".
C. Press "SELECT" to select "ON" and automatically advance to
alarm time options (alarm hour option will begin flashing.)
D. Press "UP" or "DOWN" arrows until the alarm hour you want is
displayed.
Note AM./PM (on the right) change as you scroll through the hours.
E. Press "RIGHT" arrow to save alarm hour and advance to alarm
minutes. Program alarm minutes in the same way.
F. Press "SELECT" to store the alarm time.
The display will show "ON" and the alarm icon will be displayed.
G. Press "MENU" repeatedly to close menu mode. (Current time
will be displayed.)
http://www.midlandradio.com
5

Advertisement

   Also See for Midland WR-100

   Related Manuals for Midland WR-100

Comments to this Manuals

Symbols: 0
Latest comments:
  • PETE DAWES Dec 28, 2014 07:32:
    CAN'T FIND THE MEANING OF THE " PLUG" SYMBOL IN THE UPPER PORTION OF THE LCD DISPLAY IN THE WR-100 MANUAL. ITS THERE (PLUG) WHETHER OR NOT THE EXTERNAL POWER IS PLUGGED IN. I CHECKED THE EXTERNAL POWER SUPPLY AND IT IS GOOD AND HAVE
    NEW BATTERIES INSTALLED. UNIT WORKS GOOD OTHERWISE.​
    WHAT DOES THE PRESENCE OF THE "PLUG​​" IN THE DISPLAY INDICATE?
    ​​PETE DAWES / pdawes@roa​​drunner​.co​m / 716 625 4103
  • PETE DAWES Dec 28, 2014 07:59:
    CAN'T FIND THE MEANING OF THE " PLUG" SYMBOL IN THE UPPER PORTION OF THE LCD DISPLAY IN THE WR-100 MANUAL. ITS THERE (PLUG) WHETHER OR NOT THE EXTERNAL POWER IS PLUGGED IN. I CHECKED THE EXTERNAL POWER SUPPLY AND IT IS GOOD AND HAVE
    NEW BATTERIES INSTALLED. UNIT WORKS GOOD OTHERWISE.
    WHAT DOES THE PRESENCE OF THE "PLUG​" IN THE DISPLAY INDICATE?
    ​PETE DAWES / pdawes@roa​drunner.co​m / 716 625 4103