Download Print this page

Midland WR-100 Owner's Manual: Fcc Compliance Information; Specifications

Noaa all hazard/weather receiver, same digital weather/hazard alert receiver.
Hide thumbs

Advertisement

Please send your Weather Radio To:

FCC COMPLIANCE INFORMATION.

MIDLAND (NOAA) Weather Receiver
Model WR-100, "S.A.M.E. Digital Weather/Hazard Alert Receiver"
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference; (2) This device must accept any interference
received including interference that may cause undesired operation.
SPECIFICATIONS.
Specifications are nominal and subject to change.
General
Frequency Range
(162.4O, 162.425, 162.45, 162.475, 162.50, 162.525, 162.55MHz)
Number of WX Channels..................................... 7
Input Voltage ....................................................... 9-14 Volts DC
Dimensions
130MM W x 50MM H x 152MM D (5
Receiver
20 dB Quieting Sensitivity.................................... 0.5 uV
FIPS County code Sensitivity at5kHz Dev .......... 0.5uV
Channel Selectivity .............................................. ±25kHz, 60dB
Speaker Impedance ............................................ 8 ohms
Speaker Output at10%THD................................. 200 mW max.
http://www.midlandradio.com
Midland Radio Corporation
Warranty Service Department
1120 Clay Street
North Kansas City, Missouri 64116
Phone:
(816) 241-8500
Fax:
(816) 241-5713
E-mail:
mail@midlandradio.com
URL:
www.midlandradio.com
1
/
x 2 x 6 in.)
2
20

Advertisement

COMING SOON

   Also See for Midland WR-100

   Related Manuals for Midland WR-100

Comments to this Manuals

Symbols: 0
Latest comments:
  • PETE DAWES Dec 28, 2014 07:32:
    CAN'T FIND THE MEANING OF THE " PLUG" SYMBOL IN THE UPPER PORTION OF THE LCD DISPLAY IN THE WR-100 MANUAL. ITS THERE (PLUG) WHETHER OR NOT THE EXTERNAL POWER IS PLUGGED IN. I CHECKED THE EXTERNAL POWER SUPPLY AND IT IS GOOD AND HAVE
    NEW BATTERIES INSTALLED. UNIT WORKS GOOD OTHERWISE.​
    WHAT DOES THE PRESENCE OF THE "PLUG​​" IN THE DISPLAY INDICATE?
    ​​PETE DAWES / pdawes@roa​​drunner​.co​m / 716 625 4103
  • PETE DAWES Dec 28, 2014 07:59:
    CAN'T FIND THE MEANING OF THE " PLUG" SYMBOL IN THE UPPER PORTION OF THE LCD DISPLAY IN THE WR-100 MANUAL. ITS THERE (PLUG) WHETHER OR NOT THE EXTERNAL POWER IS PLUGGED IN. I CHECKED THE EXTERNAL POWER SUPPLY AND IT IS GOOD AND HAVE
    NEW BATTERIES INSTALLED. UNIT WORKS GOOD OTHERWISE.
    WHAT DOES THE PRESENCE OF THE "PLUG​" IN THE DISPLAY INDICATE?
    ​PETE DAWES / pdawes@roa​drunner.co​m / 716 625 4103