Get Started; Connect Power - Philips AD315/12 User Manual

Docking speaker
Table of Contents

Advertisement

3 Get started

Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Connect power

This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
DC IN
Option 2: Battery power
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Remove batteries if they are exhausted or will not be
used for a long time.
Batteries contain chemical substances, so they should
be disposed of properly.
Open the battery compartment.
1
Insert 4 x 1.5V AA batteries with correct
polarity (+/-) as indicated.
2
Close the battery compartment.
4X1.5V UM3/LR6
EN
6

Advertisement

Table of Contents
loading

Table of Contents