Dell Latitude D500 Service Manual page 16

Back to Contents Page
Fan
Dell™ Latitude™ D500 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the keyboard.
3. Remove the palm rest.
4. Remove the microprocessor thermal-cooling
5. Pull straight up on the fan cable connector to disconnect it from the system board connector.
1 M2.5 x 8-mm screws (2)
2 fan
3 fan cable connector
4 system board connector
6. Remove the two M2.5 x 8-mm screws from the fan, and pull the fan away from the system board.
Back to Contents Page
Computer."
assembly.