Input Menu - Hitachi CP-S225 User Manual

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu

With the INPUT menu, the four items shown in the Table below can be
performed. With inputting of RGB IN signal, the horizontal and vertical
frequencies of the signal will be displayed on the initial screen of the
INPUT menu.
Perform each operation in accordance with the instructions in the Table.
INPUT Menu
Item
AUTO
VIDEO
HDTV
SYNC ON G
4
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): Automatically selects the proper VIDEO
mode for the current input signal. This function is active only when the AUTO
mode is selected for the item VIDEO. Refer to the description for the item
VIDEO below.
• This function may not be available with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select Mode of Signal Type (for VIDEO/S-VIDEO):
⇔
AUTO NTSC
NTSC4.43 ⇔
Selecting AUTO mode activates and performs the AUTO function for VIDEO/S-
VIDEO. It automatically selects the proper mode from among those above.
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.
The image becomes irregular, or lacks color.)
• AUTO mode may not function correctly with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
Select HDTV Signal Mode:
⇔
1080i 1035i
• If the selected HDTV mode is incompatible with the input signal, the picture
may be distorted.
On/Off SYNC ON G Mode:
⇔
TURN ON
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
allows reception of SYNC on G.
• In the SYNC ON G mode, the picture may be distorted with certain input
signals. In such a case, remove the signal connector so that no signal is
received and turn SYNC ON G off, and then reconnect the signal.
Description
⇔
PAL
M-PAL ⇔ N-PAL
TURN OFF
MENU
MAIN
AUTO
PICTURE-1 VIDEO
PICTURE-2
HDTV
INPUT SYNC ON G
SCREEN
OPTION
: SELECT
Example : INPUT Menu
(AUTO)
⇔
SECAM
EXECUTE
⇔