Ports And Cables - Hitachi CP-S225 User Manual

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
RGB input
AUDIO input
(from the computer)
RS-232C communication
S-video input
Video input
Component video input
Audio input
(from video equipment)
NOTE
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
Projector Port
RGB IN
AUDIO IN
CONTROL
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO Y
COMPONENT VIDEO C /P
B
COMPONENT VIDEO C /P
R
AUDIO IN L
AUDIO IN R
Connection Cables
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
Optional audio cable with stereo mini jack
Optional RS-232C cable
Optional S-video cable with mini DIN 4-pin
jack
Accessory audio/video cable
Optional component video cable
B
R
Accessory audio/video cable or optional
audio cable with RCA jack
9