Advertisement
For board room, conference hall
Ample Features for Increased Expressiveness and Operation Ease
Ultra Quiet 28dB Operation
Fan noise during projector operation can be distracting
during a presentation or videoconference. XD8100U Series
projectors operate at a significantly low noise level of only
28dB (i.e., using a single lamp in "low lamp" mode). As a
result, presentations and conferences can be held without
distracting projector noise in the background.
Examples of Noise Levels
20dB : Rustling leaves, the ticking of
a wall clock (from 1m in front)
28dB
30dB : A whisper, a suburban
area very late at night
40dB : A quiet neighborhood,
small birds chirping
Geometric Corrections
■ Keystone Correction
Trapezoidal distortion caused when the projector is not posi-
tioned directly in front of the screen is corrected in both
vertical and horizontal directions.
■ Cornerstone Correction
Pixel conversion is used to correct trapezoidal and diagonal
distortion that causes oblique images, ensuring the proper
aspect ratio.
screen
■ Curved-surface Projection Correction
Projectors in the series are equipped with a distortion cor-
rection function that can be used when projecting images
onto curved surfaces. Coordinates at the image's four cor-
ners are adjusted, enabling the
projection angle to be adjusted at
the time of angled or stacked pro-
jection. It is extremely handy for
unique applications like projecting
images onto special surfaces such
as pillars at event sites.
3
Multi-screen Solutions
■ Edge Blending
Edge blending creates a seamless image by adjusting the
brightness at adjoining edges when using multiple projec-
tors side-by-side to reproduce single widescreen images.
This feature can also be utilized for top-bottom projection or
a combination of side-by-side and top-bottom images; for
example, when images are projected from four projectors in
a two-by-two arrangement.
Edge blending function
Image overlap apparent
With
Without
edge blending
edge blending
Multiple projectors side-by-side
Multiple projectors top-bottom
■ Color Matching
The use of multiple projectors to create a larger image can
result in color variations due to slight differences in projector
image processing. XD8100U Series projectors are equipped
with a color matching function that resolves this problem.
Each projector is adjusted so that the same colors are repro-
duced when multiple projectors are used simultaneously.
Color matching function
For Auditorium
For Digital Signage
Interchangeable Color Wheels
Optional
Projectors come equipped with a color wheel that accentu-
ates brightness, and an optional color wheel for accentuat-
ing color is available. A sensor-based detection function is
embedded in each unit to detect when a color wheel is re-
placed, at which time the color wheel index is automatically
adjusted. This interchangeability enables a more appropriate
expression of the images being reproduced.
✽ Excluding XD8000U
360° Projection Capability
Images can be projected over a full
360° range along the vertical axis* in-
cluding reproduction on the ceiling or
floor. The application possibilities are
limitless.
*Excluding use in high-altitude mode.
Network Connectivity
Projectors are equipped with a RJ-45 LAN terminal for
remote operation. Additionally, when used with Crestron
RoomView
TM
, integrated control of up to 250 projectors in-
cluding power on/off control, message display and confir-
mation of lamp service hours is possible. XD8100U Series
are equipped with AMX Device
Discovery for simplified device
management and compatible
with PJLink
.
TM
The trademark of PJLink is trademark applied for registration or registered
trademark in Japan, the United States, and other countries and areas.
Multiple Terminals
Many different interfaces are possible thanks to a variety of
terminals including 3G-SDI (UD8400U only), DVI-D (HDCP),
HDMI and 5BNC. A control terminal (compatible with RS-
232C) is also provided for easier system integration.
(UD8400U)
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the
IDs allows control of each individual projector when mul-
tiple projectors are installed.
Power Zoom/Focus and Lens Shift
The zoom/focus and lens shift adjustment are powered by
an electric motor, ensuring easy operation.
Stand-by Wattage under 0.3W*
Stand-by (low) mode power consumption is less than 0.3W,
offering increased energy savings and further contributing
to environmental preservation.
*When in stand-by (low) mode. At this time, use of the LAN function,
serial output and Remote 1 is not possible.
Mechanical Shutter
An internal shutter in the projector enables light to be com-
pletely blocked when the projector is in Mute mode.
✽ Excluding XD8000U
Lamp Side Access
The lamps can be accessed from the side of the unit.
OSD menu multilanguage compatibility
●
(19 languages*)
2-Screen mode
●
(
(
PinP: XD8100U
Split: WD8200U
XD8000U
UD8400U
Direct power off
●
Test pattern
●
High-altitude mode (2,000 to 2,700 m)
●
Closed caption support
●
*Previous languages: Chinese, English, French, German, Italian,
Japanese, Korean, Polish, Portuguese, Russian,
Spanish, Swedish
Languages added:
Dutch, Indonesian, Malaysian, Norwegian, Thai,
Turkish, Vietnamese
4
Advertisement
