First Time Use - Hitachi 50VF820 Operating Manual

Accessories
Check to make sure you have the following accessories before disposing of the packing material.
Remote Control
Remote Control Unit CLU-4352UG2 (Part No. HL02073).
Two "AA" size, 1.5V batteries (For Remote Control Unit).
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1. Open the battery cover of the remote control by pushing down and sliding the back cover off.
2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the
springs and lift them out.
3. Match the batteries to the (+) and (-) marks in the battery
compartment.
4. Insert the bottom of the battery, the (-) side, into the battery
compartment first, push towards the springs and insert the
top of the battery, the (+) side, into place. Do not force the
battery into the battery compartment.
5. Replace the cover.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or
equivalent type.
4
Two "AA" size,
1.5V batteries
For US models: For optional accessories,
please access our website at
www.hitachi.us/tv
Bottom View (Remote Control)
Lift up on tab to remove back cover.