How To Access The Diagnostics Utility - Cisco LINKSYS WUSB100 User Manual

Chapter 3
PEAP
RADIUS - PEAP
If you selected PEAP, configure the following:
Login Name Enter the login name of your wireless
network.
Password
Enter the password of your wireless network.
Server Name
Enter the name of the authentication server
(this is optional).
Certificate
Select the certificate you installed to
authenticate you on your wireless network. If you want to
use any certificate, keep the default, Trust Any.
Inner Authen.
Select the authentication method used
inside the PEAP tunnel.
Click Next to continue, or click Back to return to the
previous screen.
6. The Confirm New Settings screen appears.
Confirm New Settings
To save the new settings, click Save. To edit the new
settings, click Back. To exit Advanced Setup through
the Monitor, click Exit.
RangePlus Wireless Network USB Adapter
7. The Congratulations screen appears. Click Connect to
Network to implement the new settings immediately
and return to the Link Information screen. Click Return
to Profiles screen to keep the current settings active
and return to the Profiles screen.
Congratulations
Congratulations! The profile is
successfully configured.

How to Access the Diagnostics Utility

After installing the Adapter, the Diagnostic utility is
installed on your computer. Follow these instructions to
run the Diagnostics utility:
Start.
1. Click
Programs.
2. Select
3. Select Linksys RangePlus Wireless USB Adapter.
4. Click Diagnostic.
Run Diagnostics Utility
Configuration
13