Appendix D: Upgrading Firmware; Figure D-1: Upgrade Firmware; Figure D-2: Detected Lan Cards; Figure D-3: Bin File Information - Linksys WPS54GU2 User Manual

Wireless-G PrintServer for USB 2.0

Appendix D: Upgrading Firmware

The PrintServer's firmware is upgraded through the Bi-Admin Management utility. Follow these instructions:
1. Download the firmware from Linksys's website at www.linksys.com/international.
2. Open the Bi-Admin Management utility.
3. Click Main => Upgrade Firmware.
4. Click the Files... button to browse for the file.
5. The Detected LAN Cards screen will appear, as shown in Figure C-2. Select the LAN card the PrintServer is
connected to, and then click the OK button. Select the firmware file you want to use.
6. View the BIN File Information screen, and click the OK button if you have selected the correct firmware file.
Click the Cancel button to select a different firmware file.
7. On the Upgrade screen, click the Upgrade button. Click the Cancel button to cancel the firmware upgrade.
For more information, click the Help button.
Appendix D: Upgrading Firmware

Figure D-1: Upgrade Firmware

Figure D-2: Detected LAN Cards

Figure D-3: BIN File Information

51