Page 1
NeoTV Streaming Player (NTV200) Installation Guide...
Page 2
NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US only): 1-888-NETGEAR Phone (Other Countries): ...
Front and Rear Views What You Need to Use Your NeoTV Player • TV with HDMI port • HDMI cable • Broadband Internet connection • A wireless or wired network • Device with Internet browser for service activation...
Connect to the TV Make sure that your TV is on and set to display the correct video input. Connect an HDMI cable (sold separately) to the HDMI port on your player and to the HDMI IN port on your TV. HDMI supports 5.1 surround sound (if available).
Remote Control Batteries To use the remote control, remove the plastic strip beneath the batteries as shown. Connect to Your Home Network To use your player, you need to connect it to your home network with either a wireless or a wired connection. After you get your network ready, the onscreen guided setup helps you connect your player to your network.
Page 7
Wired Connection Use an Ethernet cable (sold separately) to connect your player to a LAN port on your router. NeoTV Router...
Page 8
Wireless Connection If you are using a wireless connection, place your player within range of your wireless network. For best wireless reception, avoid enclosing your player in a cabinet. To connect wirelessly, you can use Wi-Fi Protected Setup (WPS), or you can select your network and enter its password using the onscreen setup guide.
Page 9
Onscreen Guided Setup On your TV: • Use the remote control to follow the NeoTV onscreen setup instructions, which include setting the output resolution to the TV, and the standby timing, connecting to a network, and checking for the latest NeoTV software update. •...
Remote Control App NeoTV Remote app turns your iPhone or Android phone into a NeoTV Streaming Player remote control.
Page 12
To Install the Remote Control App Using your iPhone or Android smartphone, navigate to the Apple AppStore or Android Market, and search for NeoTV Remote. You can use the following QR codes to speed up this process: Apple App Store Android Market Install the app on your phone.
Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Registration through our website is strongly recommended.
Page 16
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA November 2011...