Hitachi SJ100 Instruction Manual page 53

3. When installing the inverter in an enclosure, maintain the clearance around the
inverter and verify that its ambient temperature is within specification when the
enclosure door is closed.
4. Do not open the main front panel door at any time during operation.
Check Inverter Dimensions
Step 4: Locate the applicable drawing on the following pages for your inverter.
4
Dimensions are given in millimeters (inches) format.
External Dimensions
MODEL H mm (in.)
-
93 (3.66)
SJ100 002NFE
93 (3.66)
-002NFU
107 (4.21)
-004NFE
107 (4.21)
-004NFU
107 (4.21)
-005NFE
NOTE: Some inverter housings require two mounting screws, while others require four.
Be sure to use lock washers or other means to ensure screws do not loosen due to
vibration.
67(2.64)
5(0.20)
4(0.16)
80(3.15)
SJ100 Inverter
2–9