Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Drill Master 69436
Summary of Contents for Drill Master 69436
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-800-444-3353. Item 69436... -
Page 3: Electrical Safety
A wrench or a key left attached to a moving part of the power tool may result in personal injury. Item 69436 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Power Tool Use And Care
These carry important safety information. • Any power cord must be properly If unreadable or missing, contact grounded. Ground Fault Circuit Interrupter Harbor Freight Tools for a replacement. (GFCI) should also be implemented – it prevents sustained electrical shock. 4. Avoid unintentional starting. -
Page 5: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 69436 For technical questions, please call 1-800-444-3353. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-800-444-3353. Item 69436...
-
Page 7: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. n 0 xxxx/min. No Load Revolutions per Minute (RPM) WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 69436 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Specifications
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions Trigger Lock ON Button Hex Wrench Speed Dial Dust Port Blade Clamp Assembly Baseplate Figure A Page 8 For technical questions, please call 1-800-444-3353. Item 69436... -
Page 9: Operation
3. Release the Baseplate, checking that the pin on the body is engaged between the Teeth of the Baseplate. Teeth 4. Tighten the Screws on the Baseplate in place. Screws Figure C Item 69436 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Work Piece And Work Area Set Up
The power cord must reach the work area with enough extra length to allow free movement while working. Page 10 For technical questions, please call 1-800-444-3353. Item 69436... -
Page 11: General Operating Instructions
6. Allow the Saw Blade to reach full speed then from its electrical outlet. Clean, then store rest the Baseplate on the workpiece and the tool indoors out of children’s reach. guide the Saw Blade into the workpiece. Item 69436 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Maintenance
Do not immerse the Jigsaw in liquid. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-800-444-3353. Item 69436... -
Page 13: Troubleshooting
3. Laser damaged. 3. Have a qualified service technician check the tool for internal damage. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 69436 For technical questions, please call 1-800-444-3353. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 69436... -
Page 15: Assembly Diagram
Assembly Diagram Item 69436 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.