Conference Bridge - NEC ElectraElite IPK User Manual

Multiline telephone
Hide thumbs Also See for ElectraElite IPK:
Table of Contents

Advertisement

To return to the original party, press the flashing Line key or Conf
Note 2:
key.
A Feature Access key or One Touch key may be assigned for
Note 3:
DSS.
To transfer a call directly to a personal voice mailbox, dial 7 after
Note 4:
dialing the station number.
CONFERENCE
With a call in progress:
1.
Press the Conf key.
2.
Place the second call (internal or external).
3.
Announce the conference.
4.
Press the Conf key to establish the conference.
Repeat the above procedure to add an additional party
Note 1:
(Maximum of 2 for outside calls or 3 or inside calls).
An unsupervised conference may be established by press the
Note 2:
Conf key again, after the conference has be established. The
parties may continue to converse in private. Press the flashing
Conf key to return to the conversation. This feature is available
if programmed in your system by your system administrator.

CONFERENCE BRIDGE

To make a call using a Conference Bridge:
1.
Call a Confer
ence
2.
When the voice prompt is heard, enter the password and press #.
3.
Start the conference call.
Bridge extension.
1 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electraelite ipk series

Table of Contents